中国领先的电源行业商务平台
商柜 | 社区 | 搜索 | E刊 | 帮助
[ 高级搜索 ]热门关键词：电源  UPS  EPS  开关电源  模块  电池  稳压  充电器  防雷
您的位置：首页>>产品中心>>产品详情

MINMAX MINMAX产品 MINMAX模块电源 台湾MINMAX MIW2022MIW2023

点击查看原图
公司名称：珠海市明龙电子有限公司
所属类别：电源产品分类>>模块电源(DC/DC) 　　更新时间：2008-8-21 8:59:02
电子信箱：mldzcx@tom.com
联系电话：0756-2219836
发 布 者：mldz
→ 该会员所有的产品信息    → 该公司所有的产品信息   ↑上一条  ↓下一条
产品详情

MINMAX 模块电源

3-4W, Ultra-Wide Input Range DIP, Single & Dual Output DC/DC Converters
Key Features
‧Efficiency up to 85%
‧1500VDC Isolation
‧MTBF > 1,000,000 Hours
‧4:1 Wide Input Range
‧UL1950 Safety Approval
‧Complies with EN55022 Class A
‧Temperature Performance -40°C to +71°C
‧Industry Standard Pinout
‧UL 94V-0 Package Material
‧Internal SMD Construction
 
  Selection Guide
Model Number
Input Voltage
Output Voltage
Output Current
Efficiency
Reflected Ripple Current
VDC
VDC
mA
% Typ.
mA Typ.
MIW2021
24
( 9 – 36 )
3.3
900
77
5
MIW2022
5
660
81
MIW2023
12
333
83
MIW2024
15
267
83
MIW2025
±5
±300
80
MIW2026
±12
±167
83
MIW2027
±15
±133
83
MIW2031
48
( 18 – 75 )
3.3
900
78
5
MIW2032
5
660
82
MIW2033
12
333
85
MIW2034
15
267
85
MIW2035
±5
±300
82
MIW2036
±12
±167
85
MIW2037
±15
±133
85
     
 

Minmax's MIW2000-Series power modules operate over input voltage ranges of 9-36VDC and 18-75VDC which provide precisely regulated output voltages of 3.3V, 5V, 12V, 15V, ±5V, ±12V and ±15VDC.

The -40°C to +71°C operating temperature range makes it ideal for data communication equipments, mobile battery driven equipments, distributed power systems, telecommunication equipments, mixed analog/digital subsystems, process/machine control equipments, computer peripheral systems and industrial robot systems.

The modules have a maximum power rating of 4W and a typical full-load efficiency of 85%, continuous short circuit, 50mA output ripple, EN55022 Class A conducted noise compliance minimize design-in time, cost and eliminate the need for external filtering.

   Mechanical Dimensions
Pin Connections
 
Pin
Singles
Duals
2
-Vin
-Vin
3
-Vin
-Vin
9
No Pin
Common
11
NC
-Vout
14
+Vout
+Vout
16
-Vout
Common
22
+Vin
+Vin
23
+Vin
+Vin
                     NC: No Connection
 
Case Size –
31.8x20.3x10.2mm (1.25x0.80x0.40inch)
Case Material –
Metal with Non-Conductive Baseplate
Weight – 16.2g (0.57Oz)
         
Tolerance
  
Millimeters
  
Inches
   
X.X±0.25
  
X.XX±0.01
   
X.XX±0.13
  
X.XXX±0.005
Pin
  
±0.05
  
±0.002
 
 
 
 
 
 
  
Absolute Maximum Ratings
Parameter
Min.
Max.
Units
Input Surge Voltage (1000mS)
24VDC Input Models
-0.7
50
VDC
48VDC Input Models
-0.7
100
VDC

Lead Temperature
(1.5mm from case for 10sec.)
---
260
°C
Internal Power Dissipation
---
2500
mW
Exceeding the unit absolute maximum ratings could cause damage. These are not continuous operating ratings.		  
General Characteristics
Parameter
Conditions
Min.
Typ.
Max.
Units
Isolation Voltage
60 Seconds
1500
---
---
VDC
Isolation Resistance
500VDC
1000
---
---
MΩ
Isolation Capacitance
100kHz, 1V
---
380
500
pF
Switching Frequency  
---
350
---
kHz
MTBF
MIL-HDBK-217F @25°C Ground Benign
1
---
---
MHrs
 
Environmental Characteristics
Parameter
Conditions
Min.
Max.
Units
Operating Temperature
Ambient
-40
+71
°C
Operating Temperature
Case
-40
+90
°C
Storage Temperature
-40
+125
°C
Humidity
---
95
%
Cooling
Free-Air Convection
Conducted EMI
EN55022 Class A
  
Output Characteristics
Parameter
Conditions
Min.
Typ.
Max.
Units
Line Regulation
Vin = Min. to Max.
---
±0.2
±0.5
%
Load Regulation
Io = 10% to 100%
---
±0.3
±1.0
%
Ripple & Noise
20MHz BW
---
50
75
mV P-P
Short Circuit
Continuous
 
Maximum Capacitive Load
Models by Outpu tVoltage
(Each Output on Duals)
Singles
Duals
Units
300
680
uF
     
Derating Curve
  
Notes :
1. Specifications typical at Ta=+25°C, resistive load, nominal input voltage, rated output current unless otherwise noted.
2. Transient recovery time is measured to within 1% error band for a load step change of 75% to 100%.
3. These power converters require a minimum output load to maintain specified regulation.
4. Operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed.
5. All DC/DC converters should be externally fused at the front end for protection.
6. Other input and output voltage may be available, please contact factory.
7. All specifications subject to change without notice.
 

关于该条产品信息，我有如下留言：
请您注意：
·遵守中华人民共和国的各项有关法律法规
·承担一切因您的行为而导致的法律责任
·本网留言板管理人员有权删除其管辖的留言内容
·您在本网的留言内容，本网有权在网站内转载或引用
·参与本留言即表明您已经阅读并接受上述条款
用户名： 密码： 匿名留言   免费注册电源在线会员，获取更多服务！立刻注册！
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责。电源在线对此不承担任何保证责任。

企业商柜

产品新闻

相关产品

企业商柜