MIMMAX医疗电源MIR504MIR505MIR514MIR515
产品详情
|
2W, Ultra-High Isolation DIP, Single & Dual Output DC/DC Converters | |
|
|
| Key Features |
| ‧Low Cost |
| ‧6000VDC Isolation |
| ‧MTBF > 600,000 Hours |
| ‧Short Circuit Protection |
| ‧Input 5, 12 and 24VDC |
| ‧Output 5, 12, 15, ±5, ±12 and ±15VDC |
| ‧Regulated Outputs |
| ‧Low Isolation Capacitance |
| ‧Low Leakage Current |
| ‧Complies with EN55022 Class A | |
| |
|
|
|
Model Number |
Input Voltage |
Output Voltage |
Output Current |
Efficiency |
Reflected Ripple Current |
|
VDC |
VDC |
mA |
% Typ. |
mA Typ. |
|
MIR501 |
|
5 |
400 |
62 |
15 |
|
MIR502 |
12 |
165 |
63 |
|
MIR503 |
15 |
133 |
64 |
|
MIR504 |
±5 |
±100 |
42 |
|
MIR505 |
±12 |
±83 |
57 |
|
MIR506 |
±15 |
±66 |
57 |
|
MIR511 |
12
(10.8 – 13.2 ) |
5 |
400 |
62 |
8 |
|
MIR512 |
12 |
165 |
63 |
|
MIR513 |
15 |
133 |
64 |
|
MIR514 |
±5 |
±100 |
45 |
|
MIR515 |
±12 |
±83 |
59 |
|
MIR516 |
±15 |
±66 |
59 |
|
MIR521 |
|
5 |
400 |
62 |
3 |
|
MIR522 |
12 |
165 |
63 |
|
MIR523 |
15 |
133 |
64 |
|
MIR524 |
±5 |
±100 |
45 |
|
MIR525 |
±12 |
±83 |
58 |
|
MIR526 |
±15 |
±66 |
58 | |
| |
| |
|
| |
|
Minmax's MIR500 2W DC/DC's are specially designed to provide ultra-high levels of isolation 6000VDC in a low-profile DIP package.
The series consists of 18 models with input voltages of 5V, 12V and 24VDC which offers regulated output voltages of 5V, 12V, 15VDC in both single and dual output configurations.
The MIR500 series is an excellent selection for a variety of applications including mixed analog/digital subsystems, railroad/transportation equipments, medical equipment subsystems, process/machine control equipments and automatic test instrumentation. |
|
Mechanical Dimensions |
| Pin Connections |
| |
|
Pin |
Singles |
Duals |
|
1 |
+Vin |
+Vin |
|
2 |
+Vin |
+Vin |
|
10 |
No Pin |
Common |
|
11 |
No Pin |
Common |
|
12 |
-Vout |
No Pin |
|
13 |
+Vout |
-Vout |
|
15 |
No Pin |
+Vout |
|
23 |
-Vin |
-Vin |
|
24 |
-Vin |
-Vin |
| Case Size – |
| 31.8x20.3x10.2mm (1.25x0.80x0.40inch) |
| Case Material – |
| Non-Conductive Black Plastic |
| Weight – 12.4g (0.44Oz) |
|
Tolerance |
|
Millimeters |
|
Inches |
| |
|
X.X±0.25 |
|
X.XX±0.01 |
| |
|
X.XX±0.13 |
|
X.XXX±0.005 |
|
Pin |
|
±0.05 |
|
±0.002 | |
 |
|
|
|
| | |
|
|
| Absolute Maximum Ratings |
|
Parameter |
Min. |
Max. |
Units |
|
Input Surge Voltage (1000mS) |
5VDC Input Models |
-0.7 |
7.5 |
VDC |
|
12VDC Input Models |
-0.7 |
15 |
VDC |
|
24VDC Input Models |
-0.7 |
30 |
VDC |
Lead Temperature
(1.5mm from case for 10sec.) |
--- |
260 |
°C |
|
Internal Power Dissipation |
--- |
2000 |
mW | Exceeding the unit absolute maximum ratings could cause damage. These are not continuous operating ratings. |
|
| General Characteristics |
| Parameter |
Conditions |
Min. |
Typ. |
Max. |
Units |
| Isolation Voltage |
60 Seconds |
6000 |
--- |
--- |
VDC |
| Leakage Current |
240VAC, 60Hz |
--- |
--- |
2 |
uA |
| Isolation Resistance |
500VDC |
10 |
--- |
--- |
GΩ |
| Isolation Capacitance |
100kHz, 1V |
--- |
20 |
30 |
pF |
| Switching Frequency |
|
25 |
--- |
80 |
kHz |
| MTBF |
MIL-HDBK-217F @25°C Ground Benign |
0.6 |
--- |
--- |
MHrs | | |
| |
| Environmental Characteristics |
| Parameter |
Conditions |
Min. |
Max. |
Units |
| Operating Temperature |
Ambient |
-25 |
+60 |
°C |
| Operating Temperature |
Case |
-25 |
+90 |
°C |
| Storage Temperature |
|
-40 |
+125 |
°C |
| Humidity |
|
--- |
95 |
% |
| Cooling |
Free-Air Convection |
| Conducted EMI |
EN55022 Class A | |
|
| Output Characteristics |
| Parameter |
Conditions |
Min. |
Typ. |
Max. |
Units |
| Line Regulation |
Vin = Min. to Max. |
--- |
±0.3 |
±0.5 |
% |
| Load Regulation |
Io = 10% to 100% |
--- |
±0.5 |
±1.0 |
% |
Ripple & Noise
|
20MHz BW |
--- |
30 |
50 |
mV P-P |
| Short Circuit |
Continuous | |
| |
| Maximum Capacitive Load |
Models by Output Voltage
(Each Output on Duals)
|
Singles |
Duals |
Units |
| 680 |
270 |
uF | | |
|
|
| Derating Curve |
 | |
|
|
| 1. |
Specifications typical at Ta=+25°C, resistive load, nominal input voltage, rated output current unless otherwise noted. |
| 2. |
Transient recovery time is measured to within 1% error band for a load step change of 50% to 100%. |
| 3. |
All DC/DC converters should be externally fused at the front end for protection. |
| 4. |
Other input and output voltage may be available, please contact factory. |
| 5. |
All specifications subject to change without notice. | |
| | |
| |
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责。电源在线对此不承担任何保证责任。
